Skip to product information
2019-2024 Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft
  • 2019-2024 Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft
  • 2019-2024 Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft
2019-2024 Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft

2019-2024 Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft Hamilton Cams 07-CC-24V19+ Flat Tappet Conversion Kit With 178/208 Camshaft

$3,399.00

Upgrade the valvetrain in your 2019–2024 Ram 6.7L Cummins with the Hamilton Cams Flat Tappet Conversion Kit. This complete kit replaces the factory hydraulic roller lifters and camshaft with a durable flat-tappet valvetrain designed for improved reliability, consistent valve timing, and dependable long-term performance.

The included 178/208 forged steel camshaft is paired with DLC-coated steel tappets, heavy-duty pushrods, and adjustable rocker arms with DLC-coated trunnions. The upgraded pushrods help reduce deflection under high cylinder pressure, while the DLC-coated components reduce friction and wear throughout the valvetrain.

Designed for stock and mild-performance trucks, this conversion can be installed without additional engine modifications. It is intended for applications using factory valve springs and operating below 4,000 RPM.

Features

  • Converts the factory roller valvetrain to a flat-tappet design
  • 178/208 forged steel efficiency camshaft
  • DLC-coated steel tappets
  • Heavy-duty pushrods rated for over 3,500 pounds of buckling force
  • Adjustable rocker arms with DLC-coated trunnions
  • Reduces pushrod deflection and valvetrain friction
  • Works with factory valve springs
  • No additional modifications required on stock trucks
  • 49-state emissions compliant
  • Not legal for sale or use in California

Kit Includes

  • Complete set of heavy-duty pushrods
  • Hamilton 178/208 forged camshaft
  • DLC-coated steel tappets
  • Adjustable rocker-arm assembly with DLC-coated trunnions

Fitment

Fits 2019–2024 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins diesel engine. Verify vehicle fitment before ordering.

Installation Notes

  • Intake valve lash: 0.010 inch
  • Exhaust valve lash: 0.020 inch
  • Valve lash must be checked after initial startup and again following cylinder-head retorque
  • Proper diesel engine oil and filtration are critical for protecting the DLC-coated tappets

You may also like